Most used systems are:
-
French Cleat - A “Rail” is glued to the back of the print and a second rail is attached to the wall. The system simply interlocks to hang the image. A foam block is fixed to the bottom of the print so it hangs straight down on the wall.
-
Hanger - Attach a hanger with double-sided tape on the backside of the metallic print. A foam block is fixed to the bottom of the print so it hangs straight down on the wall.
- Magnet - There will be only 2 magnets for smaller products, 3 for medium sizes, and 4 for bigger ones (this doesn't affect the image at all, because those magnets are attached to the back)
Your specific instructions will be provided in your shipment and most important, you can always contact us for support.